REPLACES: Factory B-66 flat bottom V-Block that is prone to breaking.

PROBLEM: Competition shooters know all to well how a cracked V-Block can ruin a day shoot’n. An otherwise tight shot pattern just won’t happen; of course not, Barrel’s move under heat and metal stress, especially at the highest stress points. As the Barrel and V-block gain in temperature, Barrel’s create movement which is allowed by the broken V-Block.

PURPOSE: Distributes “metal stress” created when tightening Barrel Retainer Screws to cover a much greater area, stress forces are drastically reduced, which allows a tighter Torque without risk to cracking the V-Block.

DEFINED: BossArms’ Pro-Rad V-Block distributes V-Block stress breakage to 180 Degree’s of stress direction, instead of the Factory’s measly 2 points. Tightening Barrel’s into Receiver’s creates a massive amount of forces being directed onto the V-Block standard “flat bottom” design, putting ALL the stress on the V-Block’s inside corner angles. This main area, including in-line with the holes area, is where they seem to always break; the weakest area. Titan’s Pro-Rad V-Block removes the “weak area” by distributing all stress forces to 180 Degrees of direction.
FINAL NOTE: This product has been tested utilizing excessive Torque load factors that are totally un-necessary for securing Barrel’s to 10/22 Receivers, without any breakage being experienced. 10/22 Barrel Retainer Screws (B-66) normally Torque at 35 In. Lb.’s, which is entirely adequate and recommended.

$19.95 (OUT OF STOCK UNTIL 8-10-2010)

Same “Bright Head” custom details as our Take-Down Screw, stunning…. plus comes with proper Hex Wrench.

The new BossArms SS V-Block Screws are custom made from 416 Stainless Steel,same grade as quality Match Barrels. Much more than a 100% job well done.

End the rust corrosion which also deteriorates Aluminum Receiver threads; simple as replacing two screws, done.

Notice the Super Bright and Beveled screw heads, “custom made” means just that… not the same old-hat found elsewhere. These highest quality Retainer Screws are made for a specific job, securing the V-Block with strength, durability and finesse.

Packaged:

• Two Per Package
• One 5/32nd Allen Wrench
• Replaces: Factory B-67

Comes “Bright Head” Stainless Steel only, these are awesome.

$8.95