February 1st, 2008 
admin These Ruger Factory parts are exact replacement parts for your Ruger 10/22. Perfect fit, every time.
Not sure what part you need? Look at our Ruger Schematics to match up the part number or image.
Ruger Factory Parts List:
4 Receiver Filler Screws C83CL Black
$5.96
Screws in the 4 holes on receiver top, shipped 4 ea. per set.
4 Receiver Filler Screws C83CL Silver
$5.96
Screws in the 4 holes on receiver top, shipped 4 ea. per set.
Barrel 10/22 Blue OB8001 – Take-off barrel (test fired)
$39.97
Ruger factory standard Blue Sporter barrel for all standard 10/22 models, with both sights installed. These are new take-off barrels, test fired for accuracy with 4 rounds by Ruger. Just remove your stock, remove the two barrel retainer screws and V-block, then the old barrel just slips out. Installation is just the opposite; slide in the new barrel, re-place the V-block and two screws, re-place the stock.
Barrel 10/22 Stainless Steel – Take-off Barrel (test fired)
$46.80
Ruger factory Standard Stainless steel Sporter barrel for all standard 10/22 models, silver, with both sights installed. These are new take-off barrels, test fired for accuracy with 4 rounds by Ruger. Just remove your stock, remove the two barrel retainer screws and V-block, then the old barrel just slips out. Installation is just the opposite; slide in the new barrel, re-place the V-block and two screws, re-place the stock.
Barrel Band B68, Black
$5.00
Barrel Band Black including B69 Screw.
Barrel Band B6802, SS
$5.00
Barrel Band B6802 (Clear Coated for Stainless Steel Models), includes the B69 Screw.
Barrel Band Screw B69
$1.49
Screw for B69 Barrel Band. Complete assembly can be ordered as B68.
Barrel Retainer Screw B67
$1.49
Barrel retainer screws (2 required) blue
Barrel Retainer V-Block B66
$4.05
Barrel retainer v-block (1 required) blue
Bolt B10-C Assembly
$34.50
“Color Buffed”, Ruger 10/22 complete bolt assembly, just drop in. Looks sharp with the high polish shine on exposed side. Same bolt assembly as comes in Deluxe Sporter and Target model rifles.
Bolt B10-A Assembly
$29.95
Basic bolt for the Ruger 10/22, complete bolt assembly, just drop in. This is the standard bolt assembly, not “Color Buffed” for bright shine.
Bolt Lock B41
$1.84
Locks bolt open until manually released.
Bolt Lock Spring B42
$1.49
Provides energy for Bolt Lock tension
Bolt Stop Pin B46
$1.49
Large pin stops rearward movement of bolt
Charging Handle B48A
$7.59
Complete assembly, cocking handle,guide rod & spring
Disconnector B25
$3.75
Trigger cocking mechanism
Ejector B8
$1.49
10/22 factory ejector
Ejector Cross Pin B22
$1.49
Ejector Cross Pin
Escutcheon B51
$1.49
Brass hole liner for stock take-down screw
Extractor B14
$1.49
Cartridge extractor for bolt assembly
Extractor Plunger B16
$1.49
Attaches to extractor spring between spring and extractor
Extractor Spring B15
$1.49
Provides energy for extractor functioning
Firing Pin B11
$3.89
Ruger 10/22 firing pin
Firing Pin Rebound Spring B12
$1.49
Small spring fitting between firing pin and bolt; provides energy to keep firing pin in rear most position.
Firing Pin Stop Pin B13
$1.49
Secures firing pin in place, restricts forward movement
Hammer B17A
$6.20
Ruger Factory Hammer
Hammer Bushing B43
$1.49
Centers hammer, connects to hammer sides
Hammer Pivot Pin B19
$1.49
Secures hammer in place
Hammer Spring B44
$1.49
Attaches to hammer strut assembly
Hammer Strut B18
$1.49
Retains the hammer spring
Hammer Strut Washer B45
$1.49
Secures hammer spring to strut
Magazine Latch B34 Black
$5.68
Magazine release black color
Magazine Latch B34 Silver
$5.68
Magazine release silver color
Magazine Latch Plunger B-36
$2.16
Plunger pushes magazine forward securing in place
Magazine Latch Plunger Spring B37
$1.49
Provides energy to plunger
Magazine Latch-pivot Pin B35
$1.49
Magazine latch/pivot and ejector pin
Receiver Cross Pin B5
$1.49
Secures trigger assembly to receiver, 2 pins required
Rifle Safety Lock
$4.00
This is a safety lock from Ruger, opens with a key. Keep your firearm safe from accidental discharge, lock it.
Ruger Magazine 10/22 BX-1-5
$12.95
10/22 LR 5 Shot Factory Original Rotary Magazine
Safety B52
$3.55
Safety cross bar
Safety Detent Plunger B53
$1.49
Installs top of safety detent plunger spring
Safety Detent Plunger Spring B54
$1.49
Provides energy to secure safety on/off
Scope Base Adapter w/screws Silver
$5.00
Installs top of receiver, silver color, comes with 4 mounting screws.
Scope Base Adapter w/screws Black
$5.00
Installs top of receiver, silver color, comes with 4 mounting screws.
Scope Base Screw B89 Black
$1.49
Secures scope base to receiver, shipped 1 per pack, Black color. These same screws for the “silver or black” scope base, there are no silver screws available.
Sear Spring B24
$1.49
Installs between sear and disconnector
Synthetic Takeoff Stock
$29.95
Absolutely perfect Factory replacement stocks, totally new condition and impervious to adverse weather conditions. Ruger’s black molded synthetic (an almost indestructible plastic) all-weather stock, perfect fitting the first time. And; slightly lighter than the popular Hogue rubber stock. Looks great on either the blue or silver 10/22 LR rifles. Simply remove your old birch stock and install this one with the same take-down-screw and barrel band, 3 minute job.
Take Down Screw B65
$1.49
Secures stock to action
Trigger B20 Black
$5.71
10/22 trigger, Black
Trigger B20 Silver
$5.71
Ruger 10/22 trigger, silver. This is the standard trigger made by Ruger.
Trigger Guard Assembly
$49.00
This is the complete trigger guard assembly. Comes in Blue or Silver, which you select in the shopping cart. Ruger’s standard complete trigger assembly, no accurizing work has been done.
Trigger Pivot Pin B21
$1.49
Secures trigger to trigger assembly
Trigger Plunger B39
$1.49
Attaches to plunger spring behind trigger
Trigger Plunger Spring B40
$1.49
Installs behind trigger
