December 28th, 2009
admin
New for 2007: DuPont Teflon finish applied.
BossArms’ NEW firing pin provides correct weight for reliable ignition with all types and brands of ammo. Laser cut from S-7 Tool Steel to exact tolerances, hardened along all edges by Laser cutting heat to ensure years of rigid performance; PLUS, a hardened edge reduces metal to metal friction with tighter molecules.
Maintaining the proper corrected weight and rigidness allows for faster lock time and less chance of misfires, even with low grade ammo.
The LTS-Pro Firing Pin is absolutely perfect for benchrest shooting and especially valuable for all shooting competitions; or hunters wanting the very best, cleanest shot possible. When a miss-fire simply won’t do, be confident with Titan Quality.
This is BossArms; the highest quality 10/22 Firing Pin for building the ultimate custom 10/22; be it for Plinking, Hunting, or Competition applications.
$26.95
December 28th, 2009
admin
~~~Most distinctive color….Hunter Orange. NOTE: LR Only, not for use in Magnums.
Prevents cracked and battered receivers, relieves shock wear from steel pins in aluminum holes, eliminates the loud crack from bolt hitting rear receiver steel pin; positively softens noise and bolt impact. The bolt assembly actually goes “deeper” into BufferMax, with more return velocity, than any other buffer made.
BossArms’ special blend “Polyurethane” Buffer should last a lifetime of extreme shooting. Polyurethane is blended and cured for absolute maximum abuse, regardless of the ammo quality in the 10/22. BossArms’ BufferMax will not breakdown internally or externally (crack or check).
If your BufferMax ever wears out, cracks, or checks; simply return the pieces to Sportables for a fresh BufferMax, no questions asked.
• Buffers the bolt shock like no other.
• Reduces “Stove Piping” of brass.
• Faster shot recovery.
• Lifetime warranty.
Comes one BufferMax per package.
Installation:
• Unload firearm…. “CHECK” chamber. • Remove stock.
• Tap out the factory steel pin.
• Insert BufferMax with steady pressure.
• With a finger inside receiver, guide BufferMax.
• Finger inside also makes slight movement to BufferMax.
• The slight movement helps ease the BufferMax into place.
• Re-install stock.
• DONE…. Enjoy.
| BufferMax 1 Pack |
BUFM-1 |
10.95 |
| BufferMax 4 Pack |
BUFM-4 |
27.95 |
| BufferX 1 Pack |
BUFX-1 |
10.95 |
| BufferX 2 Pack |
BUFX-2 |
17.95 |
| BufferX 3 Pack |
BUFX-3 |
23.95 |
| BufferX Team Pack (6) |
BUFX-6 |
29.95 |
| Duo Pack 1 of ea. |
BUF-DUO |
17.95 |
December 28th, 2009
admin
Hand tuned and tested for total perfection, not just a stamped out part. Each and every one is tested in a fully functioning 10/22 before packaging, you know it’s right the First time.
Auto-Bolt Release’s do NOT make your rifle fire “fully automatic”. Allows releasing bolt with just a slight nudge to the operating rod handle instead of the awkward “two-handed, push-pull, lift and let-go” factory release. Pull back slightly on the bolt handle and the bolt automatically releases, you are ready.
Comes Black or Silver DuPont Teflon finish.
$10.95
July 28th, 2009
admin
Up-grade to non-corrosive “Bright Head” SS Barrel Retainer screws.
Same “Bright Head” custom details as our Take-Down Screw, stunning…. plus comes with proper Hex Wrench.
The new BossArms SS V-Block Screws are custom made from 416 Stainless Steel,same grade as quality Match Barrels. Much more than a 100% job well done.
End the rust corrosion which also deteriorates Aluminum Receiver threads; simple as replacing two screws, done.
Notice the Super Bright and Beveled screw heads, “custom made” means just that… not the same old-hat found elsewhere. These highest quality Retainer Screws are made for a specific job, securing the V-Block with strength, durability and finesse.
Packaged:
- Two Per Package
- One 5/32nd Allen Wrench
- Replaces: Factory B-67
Comes “Bright Head” Stainless Steel only, these are awesome.
$8.95
