• USPS First Class shipping FREE in continental USA, Alaska and Hawaii for all orders, beginning 11/30/09.
• 3 to 5 Day delivery time for all orders within continental US.

All our BossArms products come with a Lifetime warrantee.  In addition, Sportables guarantees that each product bought from us is the highest grade of product you will ever find.  If you ever have any troubles with your products purchased here, we will replace any items free of charge.

REPLACES: Factory B-66 flat bottom V-Block that is prone to breaking.

PROBLEM: Competition shooters know all to well how a cracked V-Block can ruin a day shoot’n. An otherwise tight shot pattern just won’t happen; of course not, Barrel’s move under heat and metal stress, especially at the highest stress points. As the Barrel and V-block gain in temperature, Barrel’s create movement which is allowed by the broken V-Block.

PURPOSE: Distributes “metal stress” created when tightening Barrel Retainer Screws to cover a much greater area, stress forces are drastically reduced, which allows a tighter Torque without risk to cracking the V-Block.

DEFINED: BossArms’ Pro-Rad V-Block distributes V-Block stress breakage to 180 Degree’s of stress direction, instead of the Factory’s measly 2 points. Tightening Barrel’s into Receiver’s creates a massive amount of forces being directed onto the V-Block standard “flat bottom” design, putting ALL the stress on the V-Block’s inside corner angles. This main area, including in-line with the holes area, is where they seem to always break; the weakest area. Titan’s Pro-Rad V-Block removes the “weak area” by distributing all stress forces to 180 Degrees of direction.
FINAL NOTE: This product has been tested utilizing excessive Torque load factors that are totally un-necessary for securing Barrel’s to 10/22 Receivers, without any breakage being experienced. 10/22 Barrel Retainer Screws (B-66) normally Torque at 35 In. Lb.’s, which is entirely adequate and recommended.

$19.95 (OUT OF STOCK UNTIL 8-10-2010)

Just flip the Mag Release with back of your trigger finger, and be ready to catch the mag with your other hand… its dropping. It’s that easy, but not so easy as to accidentally drop the Mag. This is the most positive and fastest means of changing Mag’s there is.

BossArms’ special blend of Powder Coat finishes, Black and Silver, are the closest match to standard 10/22 finishes there is. It doesn’t have to be a different shade of silver for every component you buy. Ruger factory finishes are consistent in shades and tones of silver and black; so are Titan Powder Coated products.

$18.95

Finish

Black Silver

(click on image to enlarge)

Each part is bagged and tagged as to where it goes. The only pieces that should ever need replacing is the Receiver shelf pads, they are small (1/8”x1”). Included in the Pro Bedding Kit is a 2” strip, cuts into 16 of the small pads. You’re set….

Factual NOTE:
I realize no-one likes to start chopping on their 10/22.… BUT; if you will file (round file) enough aluminum from inside the barrel band where makes contact with the steel barrel, you will positively increase your accuracy. That small aluminum to steel pressure interferes with the natural flow of vibrations; acts similar to a clamp around a water hose restricting water. Remember, barrel bands are just for looks; 10/22 Deluxe and Bull Barrel Target models have no barrel bands.

You can’t do away with ALL vibrations, but you can control them. Restrict the vibes from traveling through your stock and back, you increase your accuracy.

As with all BossArms products; if your Pro Bedding Pads ever wear out or break; simply return the pieces to Sportables or BossArms for new parts, No Questions Asked. Buy it one time, buy it for life.

Pro Bedding Kit’s rock solid bedding system will NOT allow your Barreled Action to move around in the stock, simply will not happen. Your Barreled Action presses into the “Bedding Pads” and seats to an exact position within a week. Each time you remove/replace the stock, it will instantly return to it’s fitted position, time after time.

BossArms’ Pro Bedding Kit utilizes three different types of industrial vibration dampening material, each with it’s own special benefit. All are Chemical Resistant, and Heat Resistant to 500 Degrees.

$12.95

32 Piece Micro-Shim Kit for the Ruger 10/22. Easily shims several trigger assemblies for that allusive perfect feel.

Hammer Shim: — Sear Shim: —- Disconnector:
4 ea. .006 —— 4 ea. .002 —– 4 ea. .002
4 ea. .008 —— 4 ea. .004 —– 4 ea. .004
2 ea. .0010 —– 2 ea. .008 —– 2 ea. .008
2 ea. .0012

$12.95

BossArms’ NEW firing pin provides correct weight for reliable ignition with all types and brands of ammo. Laser cut from S-7 Tool Steel to exact tolerances, hardened along all edges by Laser cutting heat to ensure years of rigid performance; PLUS, a hardened edge reduces metal to metal friction with tighter molecules.

Maintaining the proper corrected weight and rigidness allows for faster lock time and less chance of misfires, even with low grade ammo.

The LTS-Pro Firing Pin is absolutely perfect for benchrest shooting and especially valuable for all shooting competitions; or hunters wanting the very best, cleanest shot possible. When a miss-fire simply won’t do, be confident with Titan Quality.

This is BossArms; the highest quality 10/22 Firing Pin for building the ultimate custom 10/22; be it for Plinking, Hunting, or Competition applications.

$26.95

BossArms’ well defined angles securely grip case heads and give a more positive extraction; even on tight, match chambered barrels. All extractions are greatly improved, especially on those “difficult ejections” by some ammo.

To allow for a more positive “hook point” effect, the standard 90 degree “reach to point” is relieved to 89 degrees; making for the necessary hooking effect without actually cutting into the brass rim, and instantly releases the casing as contact is made with the Ejector.

New for 2007: DuPont Teflon finish applied.

This is BossArms; the highest quality Extractor for building the ultimate custom 10/22, 10/22 Magnum, or Mark II family of hand guns; be it for Plinking, Hunting, or Competition applications.

$12.95

Prevents cracked and battered receivers, relieves shock wear from steel pins in aluminum holes, eliminates the loud crack from bolt hitting rear receiver steel pin; positively softens noise and bolt impact. The bolt assembly actually goes “deeper” into BufferMax, with more return velocity, than any other buffer made.

BossArms’ special blend “Polyurethane” Buffer should last a lifetime of extreme shooting. Polyurethane is blended and cured for absolute maximum abuse, regardless of the ammo quality in the 10/22. BossArms’ BufferMax will not breakdown internally or externally (crack or check).

If your BufferMax ever wears out, cracks, or checks; simply return the pieces to Sportables for a fresh BufferMax, no questions asked.

• Buffers the bolt shock like no other.
• Reduces “Stove Piping” of brass.
• Faster shot recovery.
• Lifetime warranty.

Comes one BufferMax per package.

Installation:
• Unload firearm…. “CHECK” chamber. • Remove stock.
• Tap out the factory steel pin.
• Insert BufferMax with steady pressure.
• With a finger inside receiver, guide BufferMax.
• Finger inside also makes slight movement to BufferMax.
• The slight movement helps ease the BufferMax into place.
• Re-install stock.
• DONE…. Enjoy.

Select your pack:

BufferMax 1 Pack $10.95 BufferMax 1 Pack $27.95 BufferX 1 Pack $10.95 BufferX 2 Pack $17.95 BufferX 3 Pack $23.95 BufferX Team Pack (6) $29.95 Duo Pack (1 of each) $17.95

Auto-Bolt Release’s do NOT make your rifle fire “fully automatic”. Allows releasing bolt with just a slight nudge to the operating rod handle instead of the awkward “two-handed, push-pull, lift and let-go” factory release. Pull back slightly on the bolt handle and the bolt automatically releases, you are ready.

Comes Black or Silver DuPont Teflon finish.

$10.95

Finish

Black Silver

Same “Bright Head” custom details as our Take-Down Screw, stunning…. plus comes with proper Hex Wrench.

The new BossArms SS V-Block Screws are custom made from 416 Stainless Steel,same grade as quality Match Barrels. Much more than a 100% job well done.

End the rust corrosion which also deteriorates Aluminum Receiver threads; simple as replacing two screws, done.

Notice the Super Bright and Beveled screw heads, “custom made” means just that… not the same old-hat found elsewhere. These highest quality Retainer Screws are made for a specific job, securing the V-Block with strength, durability and finesse.

Packaged:

• Two Per Package
• One 5/32nd Allen Wrench
• Replaces: Factory B-67

Comes “Bright Head” Stainless Steel only, these are awesome.

$8.95