NEW PRODUCT... Titan Pro-Rad V-Block with "Radiused" stress reduction, Gold Teflon coated. Comes with 2 very special custom made Stainless Steel replacement (B-67) Retainer Screws.
REPLACES: Factory B-66 flat bottom V-Block that is prone to breaking.
PROBLEM: Competition shooters know all to well how a cracked V-Block can ruin a day shoot'n. An otherwise tight shot pattern just won't happen; of course not, Barrel's move under heat and metal stress, especially at the highest stress points. As the Barrel and V-block gain in temperature, Barrel's create movement which is allowed by the broken V-Block.
PURPOSE: Distributes "metal stress" created when tightening Barrel Retainer Screws to cover a much greater area, stress forces are drastically reduced, which allows a tighter Torque without risk to cracking the V-Block.
DEFINED: Titan's Pro-Rad V-Block distributes V-Block stress breakage to 180 Degree's of stress direction, instead of the Factory's measly 2 points. Tightening Barrel's into Receiver's creates a massive amount of forces being directed onto the V-Block standard "flat bottom" design, putting ALL the stress on the V-Block's inside corner angles. This main area, including in-line with the holes area, is where they seem to always break; the weakest area. Titan's Pro-Rad V-Block removes the "weak area" by distributing all stress forces to 180 Degrees of direction.
FINAL NOTE: This product has been tested utilizing excessive Torque load factors that are totally un-necessary for securing Barrel's to 10/22 Receivers, without any breakage being experienced. 10/22 Barrel Retainer Screws (B-66) normally Torque at 35 In. Lb.'s, which is entirely adequate and recommended.
Products from TitanArms,USA are designed to enhance your shooting abilities by providing the Very Best up-grade products made anywhere in the world, plus our assurances there will be NO failures....