|
Click on the thumbnail below to see a larger picture
|
A) Very rear of Receiver presses into a Chemical and Heat Resistant 1” Round Felt Type Pad, 1/8” thick; Peel & Stick to stock. Compression 50%.
B) Sides of Receiver press into a very special 1/16” thick Treated Cork and Chemical/Heat Resistant Rubber Pad: Peel & Stick to 1/8“ receiver shelf. Compression 25%.
C) Barreled Action is pressed into the 1/16” thick Treated Cork and Chemical/Heat Resistant Rubber Pad at the Take Down Screw area; Peel & Stick to stock with TD screw passing through the provided hole. Compression 25%.
D) Barrel presses into a 1/8” x 2” Chemical/Heat Resistant Silicon Pad; Peel & Stick to inside of forearm channel at barrel band. Pads supplied for both Standard and Bull Barrels. Compression 75%.
NOTE: Compression percentage relates to how much the pad will compress for seating.
Each part is bagged and tagged as to where it goes. The only pieces that should ever need replacing is the Receiver shelf pads, they are small (1/8”x1”). Included in the Pro Bedding Kit is a 2” strip, cuts into 16 of the small pads. You’re set….
Factual NOTE:
I realize no-one likes to start chopping on their 10/22.… BUT; if you will file (round file) enough aluminum from inside the barrel band where makes contact with the steel barrel, you will positively increase your accuracy. That small aluminum to steel pressure interferes with the natural flow of vibrations; acts similar to a clamp around a water hose restricting water. Remember, barrel bands are just for looks; 10/22 Deluxe and Bull Barrel Target models have no barrel bands.
You can’t do away with ALL vibrations, but you can control them. Restrict the vibes from traveling through your stock and back, you increase your accuracy.
As with all Titan products; if your Pro Bedding Pads ever wear out or break; simply return the pieces to Sportables or TitanArms for new parts, No Questions Asked. Buy it one time, buy it for life.
Pro Bedding Kit’s rock solid bedding system will NOT allow your Barreled Action to move around in the stock, simply will not happen. Your Barreled Action presses into the “Bedding Pads” and seats to an exact position within a week. Each time you remove/replace the stock, it will instantly return to it’s fitted position, time after time.
Titan’s Pro Bedding Kit utilizes three different types of industrial vibration dampening material, each with it’s own special benefit. All are Chemical Resistant, and Heat Resistant to 500 Degrees.