~~~Extreme duty….Titan’s BufferX.
~~~.22 Magnum Velocities.
~~~Clear with Half Tone Coloring for Industry Recognition.
***Simple Drop-in installation
Prevents cracked and battered receivers, relieves shock wear from steel pins in aluminum holes (Trigger Assembly), eliminates the loud crack from bolt hitting rear receiver steel pin; positively softens noise and bolt impact. The bolt assembly makes solid contact and rebound without creating shock or stress to firearm components or optics.
Titan’s special blend “Polyurethane” BufferX should outlast all other competitor Buffers. However; the BufferX “will NOT last a lifetime in the Magnum rifle”, but the Titan Warranty positively WILL. Plus; two BufferX’s are included in the Magnum package. Each BufferX lasts approximately 2500 rounds, when one BufferX starts showing signs of wear, install the spare BufferX and send the used one back for a free no hassle replacement. That simple… and rock solid.
If your BufferX ever wears out, cracks, or checks; simply return the pieces to Sportables for a fresh BufferX, no questions asked.
• Buffers the bolt shock, even in Magnum Caliber.
• Reduces “Stove Piping” of brass.
• Faster shot recovery.
• Lifetime warranty.
Comes two BufferX's per package.
Picture 
Installation:
• Unload Firearm, “CHECK” Chamber.
• Remove stock.
• Tap out the factory steel pin.
• Insert BufferX with steady pressure.
• With a finger inside receiver, guide BufferX.
• Finger inside also makes slight movement to BufferX.
• The slight movement helps ease the BufferX into place.
• Re-install stock.
• DONE…. Enjoy.
Titan’s Polyurethane is blended and cured for “absolute maximum abuse”, regardless of the ammo quality or rated velocity in the .22 Magnum. Titan’s BufferX will not breakdown internally or externally (crack or check) until approximately 2500 rounds. The Magnum caliber is supposed to pack a punch, and it does. As long as you return the used one for a free replacement, you will always have one ready for service.